YES
The test was okay.End of test
NO
The test was not okay.Possible cause and remedy
- Test cable to component M3 (Fuel pump).
- Replace component M3 (Fuel pump).
End of test
2. No further information available.
062F
Component Y3/8n4 (Fully integrated transmission control (VGS) control unit) is defective.
Possible cause:
- Y3/8n4 (Fully integrated transmission control (VGS) control unit)
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action if component 'Y3/8n4 (Fully integrated transmission control (VGS) control unit)' is faulty
1. Remedial action if component 'Y3/8n4 (Fully integrated transmission control (VGS) control unit)' is faulty
Test prerequisites
- First of all process all other current fault codes.
POSSIBLE CAUSES
- Component Y3/8n4 (Fully integrated transmission control (VGS) control unit) is defective.
Preconditions
- Print out the initial quick test log before processing the fault code 062F.
- Create control unit log.
Important notes before commencing repair measures
- Always use the same diagnostic unit after the repair measure.
Continue with button F2
Sequence
- Data are being read from the old control unit.
Start process with button F2.
1. No further information available.
076F
The gear is implausible or the transmission is slipping. ( 7. gear )
Possible cause:
- Mechanical or hydraulic defect in the transmission ( 7. gear )
Affected functions:
- Automatic transmission Function
-------------------------------------------------
