Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 13
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. REPLACE USB DEVICE OR "iPod"
(a) Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
(b) Turn the ignition switch off.
HINT
When this DTC has been stored, it is necessary to turn off the ignition switch to make it possible for the vehicle to recognize a new
device when it is connected.
(c) Turn the ignition switch to ACC.
(d) Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
NEXT -- Continue to next step.
2. CLEAR DTC
(a) Clear the DTCs See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/DTC Check / Clear (from 12/2010).
NEXT -- Continue to next step.
3. RECHECK FOR DTC
(a) Recheck for DTCs and check if the same DTC is output again.
HINT
If DTCs are detected frequently, replace the multi-media interface ECU.
OK:
No DTCs are output.
NG -- INSPECT MULTI-MEDIA INTERFACE ECU
OK -- USB DEVICE OR "iPod" WAS DEFECTIVE
4. INSPECT MULTI-MEDIA INTERFACE ECU
