Question
- Is the measurement value OK?
YES
The measurement value is OK.Possible cause and remedy
- Lines to component Y62y1 (Fuel injector cylinder 1)
NO
The measurement value is not OK.Possible cause and remedy
- Y62y1 (Fuel injector cylinder 1)
4.1.4. Inspect component Y62y1 (Fuel injector cylinder 1) for leaks.
Figure legend
- A -ConnectionTest cable 35-pin socket box
- 001 -Sockets of component N3/10 (ME-SFI [ME] control unit)
- 05 -35-pin socket box
- 050 -126-pin socket box
- 108 -Test cable 266 589 01 63 00
- N3/10 (ME-SFI [ME] control unit)
- II 1-63ConnectionTest cable
- III 64-126ConnectionTest cable
Warning!
- Connection A of test cable 108 may NOT be connected to connection B of the 126-pin socket box (050).
Continue to test with button F2
Figure legend
- 055Measuring beakerY62 (Fuel injectors)
Test sequence
- Switch off ignition.
- Remove fuel rail together with component Y62y1 (Fuel injector cylinder 1).
- Bridge between sockets (F.4) 100 and (F.17) 113 of the 126-pole socket box tester.
