Thursday, July 23, 2020

******** Audi Q5 Quattro (8RB) V6-3.2L (CALB) Technical DIAGNOSIS AND REPAIR # 001233 Date: 120314


Electrical - Electrical Malfunctions After Window Tint



00 Electrical components malfunctioning after windows have been tinted



00 12 33



2017729/5



March 14, 2012.



Supersedes Technical DIAGNOSIS AND REPAIR Group 00 number 11 - 30 dated August 2, 2011 for reasons listed below.



Affected Vehicles



180



Condition



^ Various electrical components malfunctioning.



^ Water ingress into trunk, door, dome light or dash panel areas during the application of window tint.



Technical Background



Vehicles are designed to prevent water from entering the interior cabin from the outside. To ensure a secure installation of interior components (trim



and accessory pieces), holes for fasteners are strategically placed in interior surfaces. During application of window tint film, water may enter



interior areas through these openings, damaging electrical components located near window glass. Electrical components in these areas must be



removed or protected during application of window tint film.



Production Solution



Not applicable.



Service



1. If you encounter a vehicle with a defective control module located in the area around or below windows which are tinted, check if the failure



occurred shortly after the window tint was installed.



2. Inspect the control module and wiring connections for signs of water damage.



3. Also, inform any vendors with which your Dealership may conduct business about the content of this bulletin.



Warranty



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.