- A1 (Instrument cluster)
- N3/10 (ME-SFI [ME] control unit)
- N73 (EIS [EZS] control unit)
- N47-5 (ESP and BAS control module)
- N15/3 (ETC [EGS] control unit)
- N15/5 (Electronic selector lever module control unit)
- N71 (Headlamp range adjustment control module)
- N93 (Central gateway control unit)
- N15/6 (Sprintshift control module)
- N80 (Steering column module)
- X11/4 (Diagnosis test connector)
- X63/4 (CAN databus adapter connector, 2-pin)
- Installation point of plug connection X63/4 (CAN databus adapter connector, 2-pin)
- Communication with ECU required
1.3.1.2. Wiring diagram of CAN bus
Note
- WIS is not available on this system.
- It is not possible to display the requested WIS document [ PE0019P2200TA ].
- You can start WIS on another system and display the WIS document by entering the document number [ PE0019P2200TA ] in the 'Contents'
field.
1.3.1.2. No further information available.
1.3.2. Measurements with multimeter on CAN network
Test 1.3.2.1: Voltage supply of engine compartment CAN control modules
Test 1.3.2.2: Resistance test of engine compartment CAN
1.3.2.1. Voltage supply of engine compartment CAN control modules
