Monday, February 15, 2016

Mercedes Benz E 350 4MATIC Sedan (212.087) V6-3.5L (272.977) Campaign - Update Front SAM Parameters

2010 Mercedes Benz E 350 4MATIC Sedan (212.087) V6-3.5L (272.977) Campaign - Update Front SAM Parameters

Vehicle: All Technical Service Bulletins

Campaign - Update Front SAM Parameters

FILE:

SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER

PARTS: GROUP I OF INFORMATION _ PARTS & ACCESSORIES BINDER

Campaign No. 2010030010, April 2010

TO: ALL MERCEDES-BENZ CENTERS

SUBJECT: Model 212, Model Year 2010

Update Front SAM Parameters

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the

specified values of the backup battery in the front SAM may be set too low. This may lead to fault messages in the instrument cluster. Dealers will

update the front SAM parameters at the next workshop visit.

Prior to performing this Service Campaign:

^ Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.

^ Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.

Please note that Recall and Service Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

Approximately 16,616 vehicles are affected.

Procedure

Note:

^ Use Xentry 01-02/2010 with all associated patches or higher.

^ Follow the steps exactly as described in Xentry.

^ Battery charger not required.

1. Connect Star Diagnosis to vehicle.

2. Update backup battery coding: Control unit view/Driver-side SAM - Front signal acquisition and actuation module

(N10/1)/Adaptations/Configuration/SCN/SCN coding.

3. Follow on-screen instructions.

Note:

The following allowable labor operation should be used when submitting a warranty claim for this repair:

Warranty Information

-----------------------------------------------------Page 1-----------------------------------------------------