Update
Vehicle: All Technical Service Bulletins
Computers/Control - XD/DAS Add-Ons Software Update
DAS/XD ADD-ON 2009-10-29-1294 FOR PASSENGER CARS
Topic number LI58.40-P-048513
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 11-24-2009
Validity DVD version 10/2009
Reason for change
Reason for block
Complaint:
AAC
Model series: 221, 216
Fault code 963C is set and AC OFF cannot be activated
ISM
Model series: 164, 212, 216, 221, 251
Control unit programming for hardware object number 0054461710 reports:
"The following control unit software versions
are available for control unit programming: 0114489610, 0124484610." After control unit programming, the control unit cannot be started up.
ETC
Model series: 204
Control unit programming for software object number 0024484710 reports: "No newer control unit software found".
DTR
Model series: 216
Control unit programming for software object number 2164420400 reports: "No newer control unit software found".
ME 2.7.2
Model series: 230
Control unit programming for various hardware object numbers reports: "No newer control unit software found".
CDI6
Model series: 164
Control unit programming for hardware object number 6429010400 reports: "No newer control unit software found".
CDI6
Model series: 164, 251
Control unit programming for software object numbers 642 902 69 00, 642 903 53 00 and 642 903 54 00 reports: "No newer control unit software
found".
Front SAM
-----------------------------------------------------Page 1-----------------------------------------------------
2010 Mercedes Benz E 350 4MATIC Sedan (212.087) V6-3.5L (272.977)
Model series: 164, 251
Control unit programming for software object numbers 164 442 17 00 and 164 442 33 00 reports: "No newer control unit software found".
ESP
Model series: 207
Control unit programming for software object numbers 212 442 19 53 and 212 902 04 00 reports: "No newer control unit software found".
ICM
Model series: 212
Control unit programming for various hardware object numbers reports: "No newer control unit software found".
TGW
Model series: 204
Control unit programming for hardware object numbers 204 870 15 89, 204 870 17 90, 204 870 70 89 and 204 870 79 90 reports: "The following
control unit software versions are available for control unit programming: 204 902 15 01 and 204 902 30 01" After control unit programming, the
control unit cannot be started up.
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-10-29-1294 for passenger cars:
This add-on can be installed over DAS/XD version 10/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
Control unit/fault code
Validity
-----------------------------------------------------Page 2-----------------------------------------------------
