Automotive DIAGNOSIS ,REPAIR, MAINTENANCE

DIAGNOSIS AND REPAIR, MAINTENANCE, PARTS AND LABOR, SHOP OPERATIONS, TECHNICIAN'S REFERENCE, DIAGNOSTIC TROUBLE CODES(dtc), RELAYS AND MODULES, SENSORS AND SWITCHES,ENGINE, COOLING AND EXHAUST, POWERTRAIN MANAGEMENT, TRANSMISSION AND DRIVETRAIN, BRAKES AND TRACTION CONTROL, STARTING AND CHARGING, POWER AND GROUND DISTRIBUTION, STEERING AND SUSPENSION, HEATING AND AIR CONDITIONING, RESTRAINTS AND SAFETY SYSTEMS, ACCESSORIES AND OPTIONAL EQUIPMENT, BODY AND FRAME,CRUSIS CONTROL.

Showing posts with label Emissions - I/m Dynamometer Emissions Testing. Show all posts

Tuesday, March 6, 2018

Mercedes Benz E 550 4MATIC Sedan Technical Service Bulletin # S-14_00-31 Date: 130201 Emissions - I/m Dynamometer Emissions Testing

Mercedes Benz E 550 4MATIC Sedan Technical Service Bulletin # S-14_00-31 Date: 130201
Emissions - I/m Dynamometer Emissions Testing
Date: February 1, 2013
Order No: S-B-14.00/31
Supersedes: S-SI-MBNA-14/12A, May 1998
Group: 14
Revision a:
Updated to include model application guide for I/M 240 dynamometer testing
SUBJECT:
MY-All, Models All
I/M 240 Emissions Testing on Dynamometer
The enhanced Inspection/Maintenance emission testing program (I/M 240) is in effect in several states.
It is recommended that all vehicles be tested on a 4-wheel dynamometer.
The following vehicle may be tested on a 2-wheel dynamometer:
^ Mercedes-Benz vehicles that are 2WD and not equipped with Acceleration Slip Regulation (ASR)
^ Mercedes-Benz Maybach and smart vehicles that are 2WD and have "Dyno-Mode" capability (must be activated)
The following vehicles must be tested on a 4-wheel dynamometer:
^ Mercedes-Benz vehicles equipped with ASR
^ Mercedes-Benz vehicles equipped with 4MATIC
^ Mercedes-Benz vehicles that are 2WD and do not have "Dyno-Mode" capability
2010 Mercedes Benz E 550 4MATIC Sedan (212.090) V8-5.5L (273.970) Page 401
Please see Attachment 1 for a list of vehicles that must be tested on a 4-wheel dynamometer.
2010 Mercedes Benz E 550 4MATIC Sedan (212.090) V8-5.5L (273.970) Page 402
Please see Attachment 2 for a list of vehicles with "Dyno-Mode" capability and the activation procedure.
According to US Environmental Protection Agency (EPA) procedures, if an emissions inspector has difficulty performing the I/M 240 test on a
2-wheel dynamometer, the following should be considered:
^ Test the vehicle on a 4-wheel dynamometer, or
^ Perform an optional emission test at idle +2500 rpm
An emissions inspector should also consider the options above if they are uncertain about the Dyno-M ode activation procedure or is uncertain about
which vehicles can operate on a 2-wheel dynamometer.
Attachment 1: Vehicles That Must be Tested on a 4-Wheel Dynamometer
Please refer to the Vehicles Operator's Manual for details regarding ASR and 4MATIC.
Attachment 2: Dyno-Mode Activation Procedure for Operation of a 2WD Vehicle on a 2- Wheel Dynamometer

Thursday, March 1, 2018

Mercedes Benz E 550 4MATIC Sedan Technical Service Bulletin # S-14_00-31 Date: 130201

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts

Mercedes Benz E 550 4MATIC Sedan Technical Service Bulletin # S-14_00-31 Date: 130201
Emissions - I/m Dynamometer Emissions Testing
Date: February 1, 2013
Order No: S-B-14.00/31
Supersedes: S-SI-MBNA-14/12A, May 1998
Group: 14
Revision a:
Updated to include model application guide for I/M 240 dynamometer testing
SUBJECT:
MY-All, Models All
I/M 240 Emissions Testing on Dynamometer
The enhanced Inspection/Maintenance emission testing program (I/M 240) is in effect in several states.
It is recommended that all vehicles be tested on a 4-wheel dynamometer.
The following vehicle may be tested on a 2-wheel dynamometer:
^ Mercedes-Benz vehicles that are 2WD and not equipped with Acceleration Slip Regulation (ASR)
^ Mercedes-Benz Maybach and smart vehicles that are 2WD and have "Dyno-Mode" capability (must be activated)
The following vehicles must be tested on a 4-wheel dynamometer:
^ Mercedes-Benz vehicles equipped with ASR
^ Mercedes-Benz vehicles equipped with 4MATIC
^ Mercedes-Benz vehicles that are 2WD and do not have "Dyno-Mode" capability
2010 Mercedes Benz E 550 4MATIC Sedan (212.090) V8-5.5L (273.970) Page 401
Please see Attachment 1 for a list of vehicles that must be tested on a 4-wheel dynamometer.
2010 Mercedes Benz E 550 4MATIC Sedan (212.090) V8-5.5L (273.970) Page 402
Please see Attachment 2 for a list of vehicles with "Dyno-Mode" capability and the activation procedure.
According to US Environmental Protection Agency (EPA) procedures, if an emissions inspector has difficulty performing the I/M 240 test on a
2-wheel dynamometer, the following should be considered:
^ Test the vehicle on a 4-wheel dynamometer, or
^ Perform an optional emission test at idle +2500 rpm
An emissions inspector should also consider the options above if they are uncertain about the Dyno-M ode activation procedure or is uncertain about
which vehicles can operate on a 2-wheel dynamometer.
Attachment 1: Vehicles That Must be Tested on a 4-Wheel Dynamometer
Please refer to the Vehicles Operator's Manual for details regarding ASR and 4MATIC.
Attachment 2: Dyno-Mode Activation Procedure for Operation of a 2WD Vehicle on a 2- Wheel Dynamometer

Friday, October 20, 2017

Mercedes Benz S 550 4MATIC Technical Problem #S-14_00-31 Date: 130201 Emissions - I/m Dynamometer Emissions Testing Date: February 1, 2013 Order No: S-B-14.00/31 Supersedes: S-SI-MBNA-14/12A, May 1998

Mercedes Benz S 550 4MATIC Technical Problem #S-14_00-31 Date: 130201
Emissions - I/m Dynamometer Emissions Testing
Date: February 1, 2013
Order No: S-B-14.00/31
Supersedes: S-SI-MBNA-14/12A, May 1998
Group: 14
Revision a:
Updated to include model application guide for I/M 240 dynamometer testing
SUBJECT:
MY-All, Models All
I/M 240 Emissions Testing on Dynamometer
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968) Page 350
The enhanced Inspection/Maintenance emission testing program (I/M 240) is in effect in several states.
It is recommended that all vehicles be tested on a 4-wheel dynamometer.
The following vehicle may be tested on a 2-wheel dynamometer:
^ Mercedes-Benz vehicles that are 2WD and not equipped with Acceleration Slip Regulation (ASR)
^ Mercedes-Benz Maybach and smart vehicles that are 2WD and have "Dyno-Mode" capability (must be activated)
The following vehicles must be tested on a 4-wheel dynamometer:
^ Mercedes-Benz vehicles equipped with ASR
^ Mercedes-Benz vehicles equipped with 4MATIC
^ Mercedes-Benz vehicles that are 2WD and do not have "Dyno-Mode" capability
Please see Attachment 1 for a list of vehicles that must be tested on a 4-wheel dynamometer.
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968) Page 351
Please see Attachment 2 for a list of vehicles with "Dyno-Mode" capability and the activation procedure.
According to US Environmental Protection Agency (EPA) procedures, if an emissions inspector has difficulty performing the I/M 240 test on a
2-wheel dynamometer, the following should be considered:
^ Test the vehicle on a 4-wheel dynamometer, or
^ Perform an optional emission test at idle +2500 rpm
An emissions inspector should also consider the options above if they are uncertain about the Dyno-M ode activation procedure or is uncertain about
which vehicles can operate on a 2-wheel dynamometer.
Attachment 1: Vehicles That Must be Tested on a 4-Wheel Dynamometer
Please refer to the Vehicles Operator's Manual for details regarding ASR and 4MATIC.
Attachment 2: Dyno-Mode Activation Procedure for Operation of a 2WD Vehicle on a 2- Wheel Dynamometer

Wednesday, March 16, 2016

Emissions - I/m Dynamometer Emissions Testing

2007 Mercedes Benz S 65 AMG (221.179) V12-6.0L Turbo (275.982)

Vehicle: All Technical Service Bulletins

Emissions - I/m Dynamometer Emissions Testing

Date: February 1, 2013

Order No: S-B-14.00/31

Supersedes: S-SI-MBNA-14/12A, May 1998

Group: 14

Revision a:

Updated to include model application guide for I/M 240 dynamometer testing

SUBJECT:

MY-All, Models All

I/M 240 Emissions Testing on Dynamometer

The enhanced Inspection/Maintenance emission testing program (I/M 240) is in effect in several states.

It is recommended that all vehicles be tested on a 4-wheel dynamometer.

The following vehicle may be tested on a 2-wheel dynamometer:

^ Mercedes-Benz vehicles that are 2WD and not equipped with Acceleration Slip Regulation (ASR)

^ Mercedes-Benz Maybach and smart vehicles that are 2WD and have "Dyno-Mode" capability (must be activated)

The following vehicles must be tested on a 4-wheel dynamometer:

^ Mercedes-Benz vehicles equipped with ASR

^ Mercedes-Benz vehicles equipped with 4MATIC

^ Mercedes-Benz vehicles that are 2WD and do not have "Dyno-Mode" capability

Please see Attachment 1 for a list of vehicles that must be tested on a 4-wheel dynamometer.

Please see Attachment 2 for a list of vehicles with "Dyno-Mode" capability and the activation procedure.

According to US Environmental Protection Agency (EPA) procedures, if an emissions inspector has difficulty performing the I/M 240 test on a

2-wheel dynamometer, the following should be considered:

^ Test the vehicle on a 4-wheel dynamometer, or

^ Perform an optional emission test at idle +2500 rpm

An emissions inspector should also consider the options above if they are uncertain about the Dyno-M ode activation procedure or is uncertain about

which vehicles can operate on a 2-wheel dynamometer.

Attachment 1: Vehicles That Must be Tested on a 4-Wheel Dynamometer

Please refer to the Vehicles Operator's Manual for details regarding ASR and 4MATIC.

Attachment 2: Dyno-Mode Activation Procedure for Operation of a 2WD Vehicle on a 2- Wheel Dynamometer

-----------------------------------------------------Page 1-----------------------------------------------------