Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action if component 'Y3/8s1 (Selection range sensor (VGS))' is faulty
1. Remedial action if component 'Y3/8s1 (Selection range sensor (VGS))' is faulty
Operation number of operation texts and work units or standard texts and flat rates:27-0641Cause
- Component Y3/8s1 (Selection range sensor (VGS)) is defective.
REMEDY
- Disassemble and assemble automatic transmission using the repair instructions.
- Exchange electrohydraulic control unit.
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 53378 73IMPORTANT NOTEFollowing the repair measures, the
following checks MUST be carried out using the Diagnosis Assistance System, menu 'Initial startup'
- Initial startup with manual settings input for new control unit
Continue with button "F2"
Warning!Communication with ECU required.
2226
The left fuel level sensor has a short circuit to ground.
Possible cause:
- N10/2 (Rear SAM control unit with fuse and relay module)
- Check the CAN communication with control unit A1 (Instrument cluster).
- Interior CAN bus
Affected functions:
- Fuel level indicator
- Engine running
-------------------------------------------------
Test 1: Interior CAN bus
Test 2: CAN communication is faulty.
