Sunday, June 27, 2021

******** Audi S4 Quattro Sedan (8K2) V6-3.0L SC (CCBA) Technical DIAGNOSIS AND REPAIR # 691222 Date: 120213


71



Memory System - Comfort Control Unit(BCM2)Can't Be Coded



57 Replaced Comfort System control unit (BCM2) cannot be coded



69 12 22



2024111/6



February 13, 2012.



Supersedes Technical Service Bulletin Group 69 number 11-21 dated December 14, 2011 for reasons listed below.



Affected Vehicles



Condition



After replacing the Comfort System control unit (J393), the control unit cannot be coded via SVM spec/actual.



Technical Background



All new replacement Comfort System control units (J393) must be coded and parameterized using online SVM spec/actual or an SVM code. If the



SVM spec/actual returns a response of "Check Hardware", then the SVM code is required to code and parameterize the new replacement control



unit.



The SVM code can be found in Parts Bulletin 9-90. All parts bulletins are located on the ETKAinfo.com website. The link to ETKAinfo.com is



indicated by the icon seen in Figure 1.



72



Production Solution



Not applicable.



Service



When replacing the Comfort System control unit (J393), online coding and parameterization must first be attempted using an SVM spec/actual



comparison. If the SVM spec/actual returns a response of "Check Hardware", then it is possible one of the SVM codes listed below is required to



code and parameterize the new replacement control unit.



Tip: No main software update is performed during this SVM communication.



^If the vehicle is a 2008/2009 model year A5/S5 with an original control unit part number of 8K0907289*, you are NO longer required to run the



8T46U002 and 8T46U003 SVM codes. The actions previously provided by these SVM codes have been incorporated into the SVM code



XCHG46A001.



Tip: 8K0907064A* indicates the part number could be 8K0907064AH, 8K0907064AS, etc., and 8K0907064C* indicates the part number could be



8K0907064CS, CQ, etc., and so forth. Due to the large amounts of possible variations, not all combinations are listed above.



Warranty Information



All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to



review or audit by Audi Warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.