Collision Avoidance - False Side Object Warning
96 Audi Side Assist warning mirror light on with no objects to the side of vehicle (false warning)
96 12 36
2021739/4
June 8, 2012.
Supersedes Technical DIAGNOSIS AND REPAIR Group 96 number 10 - 13 dated October 20, 2010 for reasons listed below.
Affected Vehicles
Condition
^ False warning from lane change assistant (Audi Side Assist). The warning light in the side mirror(s) illuminate when no object is currently in the
monitored area to the sides of the vehicle.
105
^ No relevant DTC(s) stored in the lane change assistance control unit (address word 3C).
Technical Background
Software issue.
Production Solution
New software in the Audi Side Assist Control Module (J769/J770) addressed the condition.
Service
Replacement of the control unit is not necessary. Warranty claims for control unit replacements without use and application of this TSB will be
debited.
SVM Update Instructions
1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.
2. Check the software version of the lane change assistant (address word 3C). Update the software as needed using the SVM action code listed in
the table above.
Warranty
Additional Information
The following Technical DIAGNOSIS AND REPAIR will be necessary to complete this procedure:
106
^ TSB 2011732 00 Software Version Management (SVM), operating instructions.
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
Attachment
107
108
109
110
111
112
113
114
115
TSB 2011732 00 Software Version Management (SVM), operating instructions.
