Wednesday, June 30, 2021

******** Audi A8L Quattro Sedan (4E8) V8-4.2L (BVJ) Technical DIAGNOSIS AND REPAIR # 941200 Date: 121221


Lighting - Dynamic Headlight Warning Light ON/DTC Set



94 Headlight range control warning displayed in instrument cluster



94 12 00



2024877/5



December 21, 2012.



Supersedes Technical DIAGNOSIS AND REPAIR Group 94 number 12-83 dated July 9, 2012 for reasons listed below.



Affected Vehicles



243



Condition



^ Warning light for dynamic headlight range control is displayed in the instrument cluster.



^ DTC 00003 / 14 (Control unit faulty) is registered in the dynamic headlight range control unit, address word 55.



^ Both headlights function normally.



^ Vehicles equipped with adaptive (cornering) lighting.



Technical Background



There is a software issue in the dynamic headlight range control module.



Production Solution



New software version 0010 in the dynamic headlight range control module addresses this condition. If the headlight range control module has a



software version lower than 0010 installed, then use the SVM code listed in Service to update the module.



Some control units will already have software version 0010 installed but can still exhibit the conditions mentioned above. When this occurs, the



software will need to be reflashed using a separate SVM code. The corrupt software will be overwritten. The software version does not change after



the update.



Service



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



2. Update the dynamic headlight range control unit (address word 55) using the SVM action code as listed in the table above. Do not execute



both SVM action codes.



244



Warranty



Additional Information



The following Technical DIAGNOSIS AND REPAIR will be necessary to complete this procedure:



^ TSB 2011732 00 Software Version Management (SVM), operating instructions.



All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals



for the latest information.



Attachment



245



246



247



248



249



250



251



252



253



254



TSB 2011732 00 Software Version Management (SVM), operating instructions.