1.1.3.4.1.6. Transmission control
Warning!Communication with ECU required.
1.1.3.4.1.7. Motor electronics
Warning!Communication with ECU required.
1.1.3.4.1.8. Steering column module
Warning!Communication with ECU required.
E1897
Timeout of the PremAir temperature signal
Possible cause:
- B11/15 (PremAir sensor)
Affected functions:
- Power generation
-------------------------------------------------
Test 1: Check component B11/15 (PremAir sensor).
1. Check component B11/15 (PremAir sensor).
Test 1.1: Check power supply of component B11/15 (PremAir sensor).
Test 1.2: Test signal cable to component B11/15 (PremAir sensor).
Test 1.3: NoteThe PremAir sensor must be firmly latched and bonded to the PremAir radiator.
1.1. Check power supply of component B11/15 (PremAir sensor).
Check power supply of component B11/15 (PremAir sensor).
Test prerequisite
- The actual value is not o.k.
Test sequence
- Switch off ignition.
- Detach coupling at component B11/15 (PremAir sensor).
- Measure direct voltage with multimeter between sockets [ B11/15 ] 1 and [ B11/15 ] 3
- Switch on ignition.
Specified values
- Voltage[ 11.0...14.5] V
Question
- Is the measurement value OK?
