1.1.3.4.1.2. Cruise control
Warning!Communication with ECU required.
1.1.3.4.1.3. Drive authorization
Warning!Communication with ECU required.
1.1.3.4.1.4. Control unit-specific actual values :
1.1.3.4.1.4. No further information available.
1.1.3.4.1.5. Electronic selector module
Warning!Communication with ECU required.
1.1.3.4.1.6. Transmission control
Warning!Communication with ECU required.
1.1.3.4.1.7. Motor electronics
Warning!Communication with ECU required.
1.1.3.4.1.8. Steering column module
Warning!Communication with ECU required.
2. Check component N47-5 (ESP control unit).
Possible cause and remedy
- Read out fault memory of control unit N47-5 (ESP control unit).
End of test
Part 1
Monitoring of signal 'Torque request' by control unit Transmission has stopped.
Possible cause:
- N15/3 (ETC [EGS] control unit)
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Engine compartment CAN test
Test 2: Check component N15/3 (ETC [EGS] control unit).
1. Engine compartment CAN test
Test 1.1: Engine compartment CAN test
1.1. Engine compartment CAN test
Test 1.1.1: Procedure in case of CAN faults
Test 1.1.2: Read current CAN configuration and CAN fault codes
