Friday, February 19, 2021

******** Audi Q7 Quattro (4LB) V6-3.0L DSL Turbo (CATA) Technical DIAGNOSIS AND REPAIR # 971123 Date: 110331


Lighting - RH DRL Inop./DTC 02746/007 Stored



94 Right daytime running light is inoperative in Coming Home mode (DTC 02746/007)



97 11 23



2022410/6



March 31, 2011.



Supersedes Technical DIAGNOSIS AND REPAIR Group 97 number 11 - 20 dated February 9, 2011 for reasons listed below.



AFFECTED VEHICLES



220



CONDITION



^ Customer may report the following conditions:



^ In Coming Home mode, the right LED daytime running light is sporadically inoperative. The daytime running lights and fog lights operate



correctly while driving.



Tip: Coming Home mode is a convenience function that allows the front lights (headlights or daytime running lights) and taillights to remain on for



a defined time (up to 60 seconds) when exiting the car.



^ The front fog lights and the left daytime running light work correctly.



^ DTC 02746/007 [Right Daytime Running Light (DRL) Lamp, Short circuit to ground] is stored in Vehicle Electrical System Control Module



J519.



TECHNICAL BACKGROUND



Because of different current cycles between the left and right headlamps in the first 100us after activating the coming home function, the right



daytime running light is switched off.



PRODUCTION SOLUTION



Improved vehicle electrical system control module installed from CW27/2010.



SERVICE



Do not replace either headlamp for the concern described in this TSB, as this will not correct the concern. The J519 module cannot be updated and



must be replaced.



1. Replace J519 with one of the following updated versions, depending on factory equipment. Please reference ETKA for the correct part number.



4F0 910 279 AG: Vehicles equipped with power adjustable steering column (PR Code 2C7)



4F0 910 279 AH: Vehicles equipped with manually adjustable steering column (PR Code 2C5)



Tip: When adapting the daytime running lamps on the replacement module, leave the default setting to Off. Changing this setting can result in static



DTCs (01494 and 01498) in J519.



221



WARRANTY



REQUIRED PARTS AND TOOLS



ADDITIONAL INFORMATION



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.