- Resistor(80锟斤拷 C): [305...335]ohms
- Resistor(90锟斤拷 C): [220...240]ohms
- Resistor(100锟斤拷 C): [160...180]ohms
- Resistor(110锟斤拷 C): [120...140]ohms
Question
- Are the measurement values OK?
YES
The measurement values are OK.End of test
NO
The measurement values are not OK.Possible cause and remedy
- B11/4 (Coolant temperature sensor)
End of test
0865
Voltage supply of component Motor electronics / Battery voltage too high (P0563)
Possible cause:
- N3/10 (ME-SFI [ME] control unit)
Affected functions:
- Engine diagnosis
-------------------------------------------------
Test 1: Check power supply of component N3/10 (ME-SFI [ME] control unit).
1. Check power supply of component N3/10 (ME-SFI [ME] control unit).
Test 1.1: Test voltage supply of circuit 87. ( Check using actual value )
Test 1.2: Test voltage supply of circuit 30.
Test 1.3: Test current consumption of component N10/1kR (Circuit 87 relay, engine).
Test 1.4: Test voltage supply of circuit 15.
1.1. Test voltage supply of circuit 87. ( Check using actual value )
Test prerequisite
- The voltage test at component G1 (Battery) is o.k.
- Ignition ON
Status of relevant actual value:
- Battery voltage:Warning! Communication with ECU required.
Specified value
- Battery voltage[11.0 ... 15.0] V
Question:Is the actual value o.k.?
YES
The actual value is okay.End of test
NO
The actual value is not o.k.Possible cause and remedy
- Test voltage supply of circuit 30.
- Test voltage supply of circuit 87.
1.2. Test voltage supply of circuit 30.
Connect socket box to component N3/10 (ME-SFI [ME] control unit).
