Possible cause:
- This fault can be ignored and erased.
Affected functions:
- Engine output
-------------------------------------------------
Test 1: This fault can be ignored and erased.
1. This fault can be ignored and erased.
Note:This fault can be ignored and erased.
722.9 (7-gear) ETC2 as of 2008
The internal electrical check of component Y3/8y2 (K1 clutch control solenoid valve (VGS)) has failed.
Possible cause:
- Y3/8y2 (K1 clutch control solenoid valve (VGS))
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action if component 'Y3/8y2 (K1 clutch control solenoid valve (VGS))' is faulty
1. Remedial action if component 'Y3/8y2 (K1 clutch control solenoid valve (VGS))' is faulty
Operation number of operation texts and work units or standard texts and flat rates:27-0641Cause
- Component Y3/8y2 (K1 clutch control solenoid valve (VGS)) is defective.
REMEDY
- Disassemble and assemble automatic transmission using the repair instructions.
- Exchange electrohydraulic control unit.
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 53383 73IMPORTANT NOTEFollowing the repair measures, the
following checks MUST be carried out using the Diagnosis Assistance System, menu 'Initial startup'
- Initial startup with manual settings input for new control unit
Continue with button "F2"
Warning!Communication with ECU required.
