1.1.3.4.1.8. Steering column module
Warning!Communication with ECU required.
2. Check component N15/5 (Electronic selector lever module control unit).
Read and process fault code from control module EWM electronic selector lever module.
Possible cause and remedy
- Read and process fault code from control module EWM electronic selector lever module.
End of test
Part 1
No CAN message was received from control unit Air conditioning.
Test 1: CAN communication is faulty.
Test 2: Possible cause:
- Check the CAN communication with control unit Air conditioning.
- Chassis CAN bus
- Interior CAN bus
Affected functions:
- CAN Communication
Test 3: Engine compartment CAN test
Test 4: Chassis CAN bus
Test 5: Interior CAN bus
1. CAN communication is faulty.
Test 1.1: Check the CAN communication with control unit N22 (AAC [KLA] control and operating unit).
1.1. Check the CAN communication with control unit N22 (AAC [KLA] control and operating unit).
Test 1.1.1: Check the CAN communication with control unit.
1.1.1. Check the CAN communication with control unit.
Warning!Communication with ECU required.
2. No further information available.
3. Engine compartment CAN test
Test 3.1: Engine compartment CAN test
3.1. Engine compartment CAN test
Test 3.1.1: Procedure in case of CAN faults
Test 3.1.2: Read current CAN configuration and CAN fault codes
Test 3.1.3: Further CAN test options
3.1.1. Procedure in case of CAN faults
Test 3.1.1.1: How do I quickly reach my goal?
Test 3.1.1.2: General test information
