Wednesday, December 9, 2020

2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 506


The electronic analysis system for the O2 sensor in the engine control unit is defective. (P0607)



Possible cause:



- Test control unit.



Affected functions:



- Engine diagnosis



- Exhaust system



-------------------------------------------------



Test 1: Test control unit.



1. Test control unit.



Test control unit.



Possible cause and remedy



- Erase fault memory and start engine.



- Reread fault memory of control unit N3/10 (ME-SFI [ME] control unit).If fault reoccurs, replace component N3/10 (ME-SFI [ME] control



unit).



Read coding and transfer to the new control unit.End of test



0440



Heating of component G3/3 (Left O2 sensor, before TWC [KAT]) : Heating capacity is too low. (P0155)



Possible cause:



- G3/3 (Left O2 sensor, before TWC [KAT])



Affected functions:



- Engine diagnosis



- Exhaust system



-------------------------------------------------



Test 1: Check component G3/3 (Left O2 sensor, before TWC [KAT]).



1. Check component G3/3 (Left O2 sensor, before TWC [KAT]).



Warning!Communication with ECU required.



0441



Heating of component G3/4 (Right O2 sensor, before TWC [KAT]) : Short circuit to positive (P0032)



Possible cause:



- G3/4 (Right O2 sensor, before TWC [KAT])



Affected functions:



- Engine diagnosis



- Exhaust system



-------------------------------------------------



Test 1: Check component G3/4 (Right O2 sensor, before TWC [KAT]).



1. Check component G3/4 (Right O2 sensor, before TWC [KAT]).



Warning!Communication with ECU required.