YES
The measurement values are OK.End of test
NO
The measurement values are not OK.Possible cause and remedy
- Lines to component B28 (Pressure sensor)
- B28 (Pressure sensor)
Further possible causes of fault
- Vacuum line
End of test
1910
B28 (Pressure sensor) : Short circuit to ground (P0107)
Possible cause:
- B28 (Pressure sensor)
Affected functions:
- Engine output
-------------------------------------------------
Test 1: Check component B28 (Pressure sensor).
1. Check component B28 (Pressure sensor).
Test 1.1: Check component B28 (Pressure sensor) using actual value.
Test 1.2: Check power supply of component B28 (Pressure sensor).
Test 1.3: Test signal voltage of component B28 (Pressure sensor).
1.1. Check component B28 (Pressure sensor) using actual value.
Test sequence
- Switch on ignition.
Status of relevant actual value:
- Coolant temperature:Warning! Communication with ECU required.
- Intake manifold pressure (ADC):Warning! Communication with ECU required.
