Test 1: Remedial action if component 'Y3/8y1 (Working pressure control solenoid valve (VGS))' is faulty
1. Remedial action if component 'Y3/8y1 (Working pressure control solenoid valve (VGS))' is faulty
Operation number of operation texts and work units or standard texts and flat rates:27-0641Cause
- Component Y3/8y1 (Working pressure control solenoid valve (VGS)) is defective.
REMEDY
- Disassemble and assemble automatic transmission using the repair instructions.
- Exchange electrohydraulic control unit.
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 53381 73IMPORTANT NOTEFollowing the repair measures, the
following checks MUST be carried out using the Diagnosis Assistance System, menu 'Initial startup'
- Initial startup with manual settings input for new control unit
Continue with button "F2"
Warning!Communication with ECU required.
2393
Ignition angle setting has a malfunction during a cold start.
Possible cause:
- Ignition angle
Affected functions:
- Engine output
-------------------------------------------------
Test 1: Ignition angle
1. Ignition angle
Ignition angle
Cause of fault
- Catalytic converter heating-up: ACTIVE
- Vehicle stationary
- Engine load: CONSTANT
- Engine speed: CONSTANT
