Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 192
Standard resistance:
NG -- REPAIR OR REPLACE FLOOR WIRE
OK -- Continue to next step.
11. CHECK REAR AIRBAG SENSOR LH
(a) Connect the connector to the side airbag sensor LH.
(b) Interchange the rear airbag sensor LH with RH and connect the connectors to them.
(c) Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.
(d) Turn the ignition switch on (IG), and wait for at least 60 seconds.
(e) Clear the DTCs stored in memory See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/DTC Check / Clear (to 12/2010).
(f) Turn the ignition switch off.
(g) Turn the ignition switch on (IG), and wait for at least 60 seconds.
(h) Check the DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic
Trouble Codes/DTC Check / Clear (to 12/2010).
Result:
HINT
Codes other than DTC B1620/21 and B1625/22 may be output at this time, but they are not related to this check.
B -- REPLACE REAR AIRBAG SENSOR LH
A -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY
C -- USE SIMULATION METHOD TO CHECK
Driver Side - Side Airbag Sensor Circuit Malfunction - Airbag System (from 12/2010)
SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: B1620/21: Driver Side - Side Airbag Sensor Circuit Malfunction
B1620/21 - Driver Side - Side Airbag Sensor Circuit Malfunction
