Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 1130
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
NG -- REPLACE AIR CONDITIONING AMPLIFIER
OK -- REPLACE AIR CONDITIONING HARNESS ASSEMBLY
Stuck in Acceleration Sensor - Vehicle Stability Control System (to 12/2010)
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM:
C1232/32,C0371/71,C1234/34,C1243/43-C1245/45,C1279/79,C1381/97: Stuck in Acceleration Sensor
C1381/97 - Acceleration Sensor Power Supply Voltage Malfunction
DESCRIPTION
The skid control ECU receives signals from the yaw rate and acceleration sensor via the CAN communication system.
The yaw rate sensor has a built-in acceleration sensor.
If there is trouble in the bus lines between the yaw rate and acceleration sensor and the CAN communication system, the DTC U0123/62 (lost
communication with yaw rate sensor module) and U0124/95 (lost communication with lateral acceleration sensor module) are output.
These DTCs are also output when the calibration has not been completed.
DTCs C1279/79 and C0371/71 are output only in the Test Mode.
