Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 162
NG -- CHECK INSTRUMENT PANEL WIRE (SHORT TO GROUND)
OK -- Continue to next step.
7. CHECK FRONT AIRBAG SENSOR LH
(a) Connect the connectors to the center airbag sensor assembly.
(b) Interchange the front airbag sensor RH with LH and connect the connectors to them.
(c) Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.
(d) Turn the ignition switch on (IG), and wait for at least 60 seconds.
(e) Clear the DTCs stored in memory See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/DTC Check / Clear (from 12/2010).
(f) Turn the ignition switch off.
(g) Turn the ignition switch on (IG), and wait for at least 60 seconds.
(h) Check the DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic
Trouble Codes/DTC Check / Clear (from 12/2010).
Result:
HINT
Codes other than DTC B1610/13 and B1615/14 may be output at this time, but they are not related to this check.
B -- REPLACE FRONT AIRBAG SENSOR LH
A -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY
C -- USE SIMULATION METHOD TO CHECK
8. CHECK INSTRUMENT PANEL WIRE (OPEN)
(a) Disconnect the instrument panel wire connector from the engine room main wire.
