Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 164
10. CHECK INSTRUMENT PANEL WIRE (SHORT TO B+)
(a) Turn the ignition switch off.
(b) Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
(c) Disconnect the instrument panel wire connector from the engine room main wire.
(d) Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.
(e) Turn the ignition switch on (IG).
(f) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE INSTRUMENT PANEL WIRE
OK -- REPAIR OR REPLACE ENGINE ROOM MAIN WIRE
11. CHECK INSTRUMENT PANEL WIRE (SHORT TO GROUND)
(a) Disconnect the instrument panel wire connector from the engine room main wire.
(b) Measure the resistance according to the value(s) in the table below.
