Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 119
Result:
C -- REPLACE AIR CONDITIONING AMPLIFIER
B -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
A -- Continue to next step.
2. INSPECT A/C EVAPORATOR TEMPERATURE SENSOR
(a) Remove the A/C evaporator temperature sensor.
(b) Measure the resistance according to the value(s) in table below.
Standard Resistance:
NOTICE:
* Only hold the sensor at its connector. Touching the sensor may change the resistance value.
* When measuring, the sensor temperature must be the same as the ambient temperature.
HINT
* As the temperature increases, the resistance decrease (See the graph).
* When replacing the A/C evaporator temperature sensor, the attached sub-harness should be replaced along with the sensor.
NG -- REPLACE A/C EVAPORATOR TEMPERATURE SENSOR
OK -- Continue to next step.
