Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 198
(f) Turn the ignition switch off.
(g) Turn the ignition switch on (IG), and wait for at least 60 seconds.
(h) Check the DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic
Trouble Codes/DTC Check / Clear (from 12/2010).
Result:
HINT
Codes other than DTC B1620/21 and B1625/22 may be output at this time, but they are not related to this check.
B -- REPLACE SIDE AIRBAG SENSOR LH
A -- CHECK FLOOR WIRE (SHORT)
C -- USE SIMULATION METHOD TO CHECK
8. CHECK FLOOR WIRE (SHORT)
(a) Turn the ignition switch off.
(b) Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
(c) Return the side airbag sensor RH and LH to their original positions and connect the connectors to them.
(d) Disconnect the connectors from the side airbag sensor LH and rear airbag sensor LH.
(e) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE FLOOR WIRE
OK -- Continue to next step.
9. CHECK FLOOR WIRE (SHORT TO B+)
