1. Check component G3/3 (Left O2 sensor, before TWC [KAT]).
Warning!Communication with ECU required.
0600
O2 sensors upstream TWC : Plug connections of the O2 sensors are wrongly connected. (P0040)
Possible cause:
- Check assignment of plug connections to O2 sensors.
Affected functions:
- Engine diagnosis
- Exhaust system
-------------------------------------------------
Test 1: Plug connections of the O2 sensors are wrongly connected.
1. Plug connections of the O2 sensors are wrongly connected.
Possible cause and remedy
- The connectors of the O2 sensors upstream of the catalytic converter are swapped.
End of test
0606
This fault code relates to a bogus fault.
Possible cause:
- Y3/8n4 (Fully integrated transmission control (VGS) control unit)
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: This fault code relates to a bogus fault.
1. This fault code relates to a bogus fault.
Cause
- This fault code may point to a bogus fault in control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit).
REMEDY
- No further action is necessary in such cases.
- Erase fault memory.
End of test
0607
Component Y3/8n4 (Fully integrated transmission control (VGS) control unit) is defective.
Possible cause:
- Y3/8n4 (Fully integrated transmission control (VGS) control unit)
Affected functions:
- Automatic transmission Function
-------------------------------------------------
