Wednesday, September 23, 2020

2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 766


Possible cause of fault



- Leaks



Possible remedy



- Check entire exhaust system for leaks.



1046



Lambda control, before TWC right : Lambda control is at rich stop. (P0171)



Possible cause:



- Lambda control



Affected functions:



- Engine output



-------------------------------------------------



Test 1: In connection with warranty and goodwill work, supplemental information on this symptom is available in TIPS.



Test 2: Check self-adaptation.



1. In connection with warranty and goodwill work, supplemental information on this symptom is available in TIPS.



1. No further information available.



2. Check self-adaptation.



Test 2.1: Check lambda control.



2.1. Check lambda control.



Test 2.1.1: Check component Y58/1 (Purge control valve).



Test 2.1.2: Check signal from component B2/5 (Hot film mass air flow sensor) via actual value.



Test 2.1.3: Check seal of component B2/5 (Hot film mass air flow sensor) with air filter for cracks.



Test 2.1.4: Inspect air cleaner housing.



Test 2.1.5: Check component G3/4 (Right O2 sensor, before TWC [KAT]).



Test 2.1.6: Check component Y62 (Fuel injectors).



Test 2.1.7: Check exhaust system for leaks.



2.1.1. Check component Y58/1 (Purge control valve).



Test 2.1.1.1: Actuate component Y58/1 (Purge control valve).



Test 2.1.1.2: Test current consumption of component Y58/1 (Purge control valve).



Test 2.1.1.3: Perform mechanical inspection of component Y58/1 (Purge control valve).



2.1.1.1. Actuate component Y58/1 (Purge control valve).



Test sequence



- Switch on ignition.



- Actuate component Y58/1 (Purge control valve).(Operate pushbutton F2.)



Warning!Communication with ECU required.