-------------------------------------------------
Test 1: In connection with warranty and goodwill work, supplemental information on this symptom is available in TIPS.
Test 2: Check component Y58/1 (Purge control valve).
1. In connection with warranty and goodwill work, supplemental information on this symptom is available in TIPS.
1. No further information available.
2. Check component Y58/1 (Purge control valve).
Test 2.1: Actuate component Y58/1 (Purge control valve).
Test 2.2: Test current consumption of component Y58/1 (Purge control valve).
Test 2.3: Perform mechanical inspection of component Y58/1 (Purge control valve).
2.1. Actuate component Y58/1 (Purge control valve).
Test sequence
- Switch on ignition.
- Actuate component Y58/1 (Purge control valve).(Operate pushbutton F2.)
Warning!Communication with ECU required.
2.2. Test current consumption of component Y58/1 (Purge control valve).
Figure legend
- A -ConnectionTest cable 35-pin socket box
- 001 -Sockets of component N3/10 (ME-SFI [ME] control unit)
- 05 -35-pin socket box
- 050 -126-pin socket box
- 108 -Test cable 266 589 01 63 00
- N3/10 (ME-SFI [ME] control unit)
- II 1-63ConnectionTest cable
- III 64-126ConnectionTest cable
Warning!
- Connection A of test cable 108 may NOT be connected to connection B of the 126-pin socket box (050).
Continue to test with button F2
