1.1.3.4.1.2. Cruise control
Warning!Communication with ECU required.
1.1.3.4.1.3. Drive authorization
Warning!Communication with ECU required.
1.1.3.4.1.4. Control unit-specific actual values :
1.1.3.4.1.4. No further information available.
1.1.3.4.1.5. Electronic selector module
Warning!Communication with ECU required.
1.1.3.4.1.6. Transmission control
Warning!Communication with ECU required.
1.1.3.4.1.7. Motor electronics
Warning!Communication with ECU required.
1.1.3.4.1.8. Steering column module
Warning!Communication with ECU required.
2. Check component N15/3 (ETC [EGS] control unit).
Read out fault memory of transmission control unit and process stored fault codes.
Possible cause and remedy
- Read out fault memory of transmission control unit and process stored fault codes.
End of test
Part 1
No CAN message was received from control unit Transmission. (U0101)
Possible cause:
- Check the CAN communication with control unit Transmission.
- Drive train CAN bus
Affected functions:
- CAN Communication
-------------------------------------------------
Test 1: Engine compartment CAN test
Test 2: CAN communication is faulty.
1. Engine compartment CAN test
Test 1.1: Engine compartment CAN test
1.1. Engine compartment CAN test
Test 1.1.1: Procedure in case of CAN faults
