Saturday, July 4, 2020

2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 531


Test 1: Diagnosis of tumble flap 'Intake manifold' : Open circuit of sensor lines / Tumble flap shafts stick in the nonactuated position.



1. Diagnosis of tumble flap 'Intake manifold' : Open circuit of sensor lines / Tumble flap shafts stick in the nonactuated position.



Warning!Communication with ECU required.



0524



Diagnosis of tumble flap 'Intake manifold' : Short or open circuit in sensor lines / Mechanical fault of one actuating lever / Sensor faulty,



replace sensor. (P2005)



Possible cause:



- Diagnosis of tumble flap 'Intake manifold'



Affected functions:



- Engine output



-------------------------------------------------



Test 1: Diagnosis of tumble flap 'Intake manifold' : Short or open circuit in sensor lines / Mechanical fault of one actuating lever Sensor faulty,



replace sensor.



1. Diagnosis of tumble flap 'Intake manifold' : Short or open circuit in sensor lines / Mechanical fault of one actuating lever Sensor faulty,



replace sensor.



Warning!Communication with ECU required.



0537



B2/5 (Hot film mass air flow sensor)



Possible cause:



- B2/5 (Hot film mass air flow sensor)



Affected functions:



- Engine output



-------------------------------------------------



Test 1: Check component B2/5 (Hot film mass air flow sensor).



1. Check component B2/5 (Hot film mass air flow sensor).



Test 1.1: Check signal of component B2/5 (Hot film mass air flow sensor) via actual value with engine OFF.



Test 1.2: Check signal of component B2/5 (Hot film mass air flow sensor) via actual value with engine speed greater than 3500 rpm.



Test 1.3: Check reference signal of component B2/5 (Hot film mass air flow sensor).



Test 1.4: Check power supply of component B2/5 (Hot film mass air flow sensor).



1.1. Check signal of component B2/5 (Hot film mass air flow sensor) via actual value with engine OFF.



Warning!Communication with ECU required.



1.2. Check signal of component B2/5 (Hot film mass air flow sensor) via actual value with engine speed greater than 3500 rpm.



Warning!Communication with ECU required.



1.3. Check reference signal of component B2/5 (Hot film mass air flow sensor).