1.1.3.4.1.8. Steering column module
Warning!Communication with ECU required.
2. Check component N22 (AAC [KLA] control and operating unit).
Read and process fault code from control module N22 (AAC [KLA] control and operating unit).
Possible cause and remedy
- Read and process fault code from control module N22 (AAC [KLA] control and operating unit).
End of test
E2201
One or more of the signals transmitted by control unit N15/5 (Electronic selector lever module (ESM [EWM])) or A80 (Intelligent servo
module for DIRECT SELECT) via the CAN bus are implausible.
Possible cause:
- N15/5 (Electronic selector lever module control unit)
- A80 (Intelligent servo module for DIRECT SELECT)
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Check component A80 (Intelligent servo module for DIRECT SELECT).
Test 2: Check component N15/5 (Electronic selector lever module control unit).
1. Check component A80 (Intelligent servo module for DIRECT SELECT).
Read and process fault code from control module A80 (Intelligent servo module for DIRECT SELECT).
Possible cause and remedy
- Read and process fault code from control module A80 (Intelligent servo module for DIRECT SELECT).
End of test
2. Check component N15/5 (Electronic selector lever module control unit).
Read and process fault code from control module EWM electronic selector lever module.
Possible cause and remedy
- Read and process fault code from control module EWM electronic selector lever module.
End of test
2767
The signal from component Y3/8n2 (Internal speed sensor (VGS)) is not available.
Possible cause:
- Y3/8n2 (Internal speed sensor (VGS))
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action for non-available signal from component Y3/8n2 (Internal speed sensor (VGS))
1. Remedial action for non-available signal from component Y3/8n2 (Internal speed sensor (VGS))
Warning!Communication with ECU required.
