NO
The measurement value is not OK.Possible cause and remedy
- Inspect lead of voltage supply to control module N118 (Fuel pump control module) if necessary for loose contact, damage and corrosion and
repair.
End of test
NO
Replace faulty fuse.End of test
2. No further information available.
F000
Software error Operational check
No further information available.
06A3
Component Y3/8n4 (Fully integrated transmission control (VGS) control unit) is defective.
Possible cause:
- Y3/8n4 (Fully integrated transmission control (VGS) control unit)
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action if component 'Y3/8n4 (Fully integrated transmission control (VGS) control unit)' is faulty
1. Remedial action if component 'Y3/8n4 (Fully integrated transmission control (VGS) control unit)' is faulty
Test prerequisites
- First of all process all other current fault codes.
POSSIBLE CAUSES
- Component Y3/8n4 (Fully integrated transmission control (VGS) control unit) is defective.
Preconditions
- Print out the initial quick test log before processing the fault code 06A3.
- Create control unit log.
Important notes before commencing repair measures
- Always use the same diagnostic unit after the repair measure.
Continue with button F2
Sequence
- Data are being read from the old control unit.
Start process with button F2.
1. No further information available.
060A
Component Y3/8n4 (Fully integrated transmission control (VGS) control unit) is defective.
Possible cause:
- Y3/8n4 (Fully integrated transmission control (VGS) control unit)
