- Process displayed fault codes in control module Engine management.
END OF TEST
0718
Component Y3/8n1 (Turbine speed sensor (VGS)) is defective.
Possible cause:
- Y3/8n1 (Turbine speed sensor (VGS))
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action if component 'Y3/8n1 (Turbine speed sensor (VGS))' is faulty
1. Remedial action if component 'Y3/8n1 (Turbine speed sensor (VGS))' is faulty
Warning!Communication with ECU required.
0720
Mechanical fault of component Drive train
Possible cause:
- Transmission output speed
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action for non-available signal from component Y3/8n3 (Output speed sensor (VGS))
1. Remedial action for non-available signal from component Y3/8n3 (Output speed sensor (VGS))
Warning!Communication with ECU required.
0721
The transmission output speed signal is implausible when compared to the wheel rpm signal.
Possible cause:
- Transmission output speed
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action for non-available signal from component Y3/8n3 (Output speed sensor (VGS))
1. Remedial action for non-available signal from component Y3/8n3 (Output speed sensor (VGS))
Warning!Communication with ECU required.
