- Test current consumption of component M3 (Fuel pump).
- Fuel filter with integrated pressure regulator
1.1.3.2. Test delivery of component M3 (Fuel pump).
Figure legend
- A -ConnectionTest cable 35-pin socket box
- 001 -Sockets of component N3/10 (ME-SFI [ME] control unit)
- 05 -35-pin socket box
- 050 -126-pin socket box
- 108 -Test cable 266 589 01 63 00
- N3/10 (ME-SFI [ME] control unit)
- II 1-63ConnectionTest cable
- III 64-126ConnectionTest cable
Warning!
- Connection A of test cable 108 may NOT be connected to connection B of the 126-pin socket box (050).
Continue to test with button F2
Figure legend
- 055Measuring beaker
Test sequence
- Switch off ignition.
- Connect socket box (126-pin) to component N3/10 (ME-SFI [ME] control unit).
- Separate fuel feed hose at the fuel line and hold in a suitable measuring beaker.
- Insert bridge.:
- Bridge between sockets [F.4] 100 and [F17] 113 of the 126-pole socket box tester.
- Switch on ignition.<->Component M3 (Fuel pump) runs.
Specified value
- 1 liters of fuel should flow in a maximum of 20 seconds.
Question
- Is the measurement value OK?
