1.1.3.1.2. Wiring diagram of CAN bus
Note
- WIS is not available on this system.
- It is not possible to display the requested WIS document [ pe0019p2200da ].
- You can start WIS on another system and display the WIS document by entering the document number [ pe0019p2200da ] in the 'Contents'
field.
1.1.3.1.2. No further information available.
1.1.3.2. Measurements with multimeter on CAN network
Test 1.1.3.2.1: Voltage supply of engine compartment CAN control modules
Test 1.1.3.2.2: Resistance test of engine compartment CAN
1.1.3.2.1. Voltage supply of engine compartment CAN control modules
Test 1.1.3.2.1.1: Check power supply at control unit A1 (Instrument cluster).
Test 1.1.3.2.1.2: Check power supply at control unit A89 (DTR controller unit).
Test 1.1.3.2.1.3: Check power supply at control unit N3/10 (ME-SFI [ME] control unit).
Test 1.1.3.2.1.4: Check power supply at control unit N15/3 (ETC [EGS] control unit).
Test 1.1.3.2.1.5: Check power supply at control unit N15/5 (Electronic selector lever module control unit).
Test 1.1.3.2.1.6: Check power supply at control unit N15/6 (Sprintshift control module).
Test 1.1.3.2.1.7: Check power supply at control unit N47-5 (ESP, SPS [PML] and BAS control unit).
Test 1.1.3.2.1.8: Check power supply at control unit N51 (AIRmatic with ADS control module).
