Sunday, December 29, 2019

******** Audi TTS Quattro Roadster (8J9) L4-2.0L Turbo (CDMA) Technical DIAGNOSIS AND REPAIR # 911005 Date: 100216


Cellular Phone - Bluetooth(R) Call Volume Is Too Low



91 Bluetooth call volume too low



91 10 05



2018475/3



February 16, 2010.



Supersedes Technical Service Bulletin Group 91 number 08-70 dated November 7, 2008 for reasons listed below.



152



Affected Vehicles



Condition



Telephone call volume level becomes too quiet after a while and the volume cannot be increased sufficiently using the radio, steering wheel controls



or volume controls on the phone itself.



Technical Background



This can only occur with Concert II+ or Symphony II+ radios. When the volume level is being adjusted down on the radio or multi-function steering



wheel at the same time as an active phone call is ended, it is possible that the phone output level is permanently reduced in the radio.



Production Solution



A3: New software from MY2010.



TT: In preparation.



A4 / A4 Cabriolet: Not applicable (radio no longer in production).



Service



For A3, A4, A4 Cabriolet and TT vehicles:



When the condition occurs, it is possible to reset the phone output level by returning the radio to a default configuration. Only adaptation channel 51



must be changed.



1. Record all station presets. This procedure will cause all radio settings and memory to be lost because the radio will be returned to a factory default



configuration.



2. Select Vehicle Self Diagnosis >> 56 - Radio >> 012 - Adaptation >> Channel 51.



3. Change the value to a 1 and save.



It is not necessary to reset the adaptation channel to its original value. The radio settings are reset.



4. Restore station presets prior to returning vehicle to the customer.



5. Explain the technical background to the customer so as to avoid recurrence of the condition.



For A3 vehicles with a recurring customer complaint only:



Replace the radio using the applicable new part number listed in the parts table below and the appropriate GFF function test.



153



Warranty



Required Parts and Tools



Additional Information



More information on this system can be found in the following resources:



^ TSB 2019821 91 Bluetooth phone preparation: Bonding tone volume level



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.