1.1.3.2.1.3. Check power supply at control unit N3/10 (ME-SFI [ME] control unit).
Test 1.1.3.2.1.3.1: Test current consumption of component N10/1kR (Circuit 87 relay, engine).
Test 1.1.3.2.1.3.2: Test voltage supply of circuit 15.
Test 1.1.3.2.1.3.3: Test voltage supply of circuit 87. ( Check using actual value )
Test 1.1.3.2.1.3.4: Test voltage supply of circuit 30.
1.1.3.2.1.3.1. Test current consumption of component N10/1kR (Circuit 87 relay, engine).
Connect socket box to component N3/10 (ME-SFI [ME] control unit).
Figure legend
- A -ConnectionTest cable 35-pin socket box
- 001 -Sockets of component N3/10 (ME-SFI [ME] control unit)
- 05 -35-pin socket box
- 050 -126-pin socket box
- 108 -Test cable 266 589 01 63 00
- N3/10 (ME-SFI [ME] control unit)
- II 1-63ConnectionTest cable
- III 64-126ConnectionTest cable
Warning!
-
- Connection A of test cable 108 may NOT be connected to connection B of the 126-pin socket box (050).
Continue to test with button F2
Test current consumption of component N10/1kR (Circuit 87 relay, engine).
Test sequence
- Measure direct current with multimeter between sockets [F.4] 100 and [F.27] 123 of the 126-pole socket box tester.
- Switch on ignition.
Specified value
- Amperage[0.1...0.3] A
Question
- Is the measurement value OK?
