- The throttle valve must not stick and must close by internal spring force.
Question
- Is the test o.k?
YES
The test is o.k..Possible cause and remedy
- N3/10 (ME-SFI [ME] control unit)
End of test
NO
The test is not o.k..Possible cause and remedy
- Check intake tract for residue and clean if necessary.If no residue is present, replace component M16/6 (Throttle valve actuator).
1.4. Check component M16/6 (Throttle valve actuator) using actual value.
Warning!Communication with ECU required.
233D
Measured value of temperature sensor for gear oil is implausible.
No further information available.
0212
M16/6 (Throttle valve actuator) : The component was replaced without performing throttle valve adaptation. (P0638)
Possible cause:
- M16/6 (Throttle valve actuator)
Affected functions:
- Engine diagnosis
- Engine running
-------------------------------------------------
Test 1: Learning of the throttle valve stop
1. Learning of the throttle valve stop
Warning!Communication with ECU required.
0216
M16/6 (Throttle valve actuator) : Throttle valve adaptation is faulty. (P2101)
Possible cause:
- M16/6 (Throttle valve actuator)
Affected functions:
- Engine diagnosis
- Engine running
-------------------------------------------------
Test 1: Learning of the throttle valve stop
