Wednesday, October 31, 2018

Technical Service Bulletin # M650313


Cell Phone - Voice Recognition Inop. After Programming



SI M65 03 13



Audio, Navigation, Monitors, Alarms, SRS



March 2013



Technical Service



SUBJECT



Basic SVS: Voice Recognition Inoperative After Programming



Date: 1303012010 Mini Cooper (R56) L4-1.6L (N12)







Page 216



MODEL



R55



R56



R57



R58



R59



Produced from August 2010 to July 2012



R60



Produced to November 2012



With option 6FC (MINI Boost CD Radio) and option 6NE (Mobile phone Bluetooth preparation with USB audio interface)



SITUATION



After programming the vehicle with ISTA/P 2.48.x, the voice recognition (Basic SVS) is inoperative.



NOTE:



The Basic SVS only includes voice recognition for phone functions.



CAUSE



Error in the coding data of ISTA/P 2.48.x



The voice recognition function is unintentionally deactivated.



CORRECTION



Do not replace parts.



1. Perform a vehicle test using the latest ISTA diagnostic software.



Note:



When the ISTA system message displays: "Battery voltage only "XX.XX" V. Please connect charger." Please note the displayed



battery voltage reading in the repair order comments section.



2. Reprogram the vehicle using ISTA/P 2.49.0 or later



New integration level: R056-13-03-501 or higher



3. Complete all of the post-programming work as indicated in the ISTA/P Final Report. This includes performing diagnosis and clearing



faults with ISTA, if necessary.



Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.



For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle2010 Mini Cooper (R56) L4-1.6L (N12)







Page 217



WARRANTY INFORMATION



Covered under the terms of the MINI New Vehicle Limited Warranty.



Labor operation code 00 00 006 is a Main labor operation. If you are using a Main labor code for another repair, use the Plus code labor



operation 00 00 556 instead.



Refer to KSD2 for the corresponding flat rate unit (FRU) allowance. Enter the Chassis Number, which consists of the last 7 digits of the



Vehicle Identification Number (VIN). Click on the "Search" button, and then enter the applicable flat rate labor operation in the FR code



field.



If a control module fails to program correctly or initializations are required, the additional work must be claimed with separate labor



operations under the defect code listed above; refer to KSD2.



Other Repairs



If performing other ISTA diagnostics and the related test plans results with eligible and covered work, claim this work with the applicable



defect code and labor operations listed in KSD2.



Note:



Please follow any TeileClearing (TC) or Diagcode (DC) requirements that may apply to this additional work.