Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts
Technical Service Bulletin # LI58-40_P-049119 Date: 100305
Computers/Controls - DAS/XD Add-On 2009-12-11-1331
DAS/XD add-on 2009-12-11-1331 for passenger cars
Topic number LI58.40-P-049119
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 03-05-2010
Validity DVD version 11/2009
Reason for change
Reason for block
Complaint:
Rear entertainment unit (rear audio/video unit, left and right displays in rear)
Model series: X204, 212
The rear entertainment unit is sometimes not programmable. A fault message is displayed during control unit programming.
IC
Model series: 204, 212
Message in instrument cluster "Reprogramming not correct" after control unit programming.
Audio/COMAND
Model series: 212
COMAND - USA: SCN coding does not work when no hard disk is installed.
IC
Model series: 169, 245
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 359
During manual initial startup the service memory is not written correctly. HRA - Model series: 204 Control unit programming for hardware object
number 2048700426 reports: "No newer control unit software found".
CGW
Model series: 212
Control unit programming for hardware object number 2125451001 reports: "The following control unit software versions are available for control
unit programming: 2124421100,2124420700" After control unit programming, the control unit cannot be started up.
ETC
Model series: 211, 221
Control unit programming for hardware object number 0034464110 reports: "No newer control unit software found".
LRH
Model series: 212
Control unit programming for software 2129027502 reports: "The following control unit software versions are available for control unit
programming: 2519020900" After control unit programming, the control unit cannot be started up.
IC
Model series: 164, 251 Control unit programming for software object number 2514421721 reports: "No newer control unit software found".
Model series: 204, 212
Control unit programming for software object number 2129024302 reports: "No newer control unit software found".
DCU-LF
Model series: 221
Control unit programming for several hardware object number reports: "The following control unit software versions are available for control unit
programming ...." After control unit programming, the control unit cannot be started up.
AB
Model series: 164, 251
Control unit programming for several hardware object number reports: "The following control unit software versions are available for control unit
programming ...." After control unit programming, the control unit cannot be started up.
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-12-11-1331 for passenger cars:
This add-on can be installed over DAS/XD version 11/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 360
Control unit/fault code
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 361
Validity
DIAGNOSIS AND REPAIR, MAINTENANCE, PARTS AND LABOR, SHOP OPERATIONS, TECHNICIAN'S REFERENCE, DIAGNOSTIC TROUBLE CODES(dtc), RELAYS AND MODULES, SENSORS AND SWITCHES,ENGINE, COOLING AND EXHAUST, POWERTRAIN MANAGEMENT, TRANSMISSION AND DRIVETRAIN, BRAKES AND TRACTION CONTROL, STARTING AND CHARGING, POWER AND GROUND DISTRIBUTION, STEERING AND SUSPENSION, HEATING AND AIR CONDITIONING, RESTRAINTS AND SAFETY SYSTEMS, ACCESSORIES AND OPTIONAL EQUIPMENT, BODY AND FRAME,CRUSIS CONTROL.