Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts
Technical Service Bulletin # LI58-40_P-048530 Date: 091125
Computers/Control - DAS/XD Add-On 2009-10-09-1280
DAS/XD ADD-ON 2009-10-09-1280 FOR PASSENGER CARS
Topic number LI58.40-P-048530
Version 1
Design group 58.40 Workshop equipment/MB testers
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 220
Date 11-25-2009
Validity DVD version 09/2009
This add-on is dependent on the following add-ons: 1266, 1274
Reason for change
Reason for block
Complaint:
ETC
Model series:
171, 203, 209, 211, 219, 230
The new transmission control unit VGS3NAG2 could not previously be programmed.
ETC
Model series: 204, 216, 221
The new transmission control unit VGS3NAG2 could not previously be programmed.
ETC
Model series: 221
Control unit programming for hardware object number 0335457332 reports: "The following control unit software versions are available for control
unit programming: 0094484910" After control unit programming, the control unit cannot be started up.
CDI
Model series: 212
Control unit programming for software object number 6519030700 reports: "No newer control unit software found".
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-10-09-1280 for passenger cars:
This add-on can be installed over DVD version 09/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
This add-on is dependent on the following add-ons: 1266, 1274
Symptoms
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 221
Control unit/fault code
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 222
Validity
DIAGNOSIS AND REPAIR, MAINTENANCE, PARTS AND LABOR, SHOP OPERATIONS, TECHNICIAN'S REFERENCE, DIAGNOSTIC TROUBLE CODES(dtc), RELAYS AND MODULES, SENSORS AND SWITCHES,ENGINE, COOLING AND EXHAUST, POWERTRAIN MANAGEMENT, TRANSMISSION AND DRIVETRAIN, BRAKES AND TRACTION CONTROL, STARTING AND CHARGING, POWER AND GROUND DISTRIBUTION, STEERING AND SUSPENSION, HEATING AND AIR CONDITIONING, RESTRAINTS AND SAFETY SYSTEMS, ACCESSORIES AND OPTIONAL EQUIPMENT, BODY AND FRAME,CRUSIS CONTROL.