Saturday, February 24, 2018

******** Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical DIAGNOSIS AND REPAIR # 941275 Date: 120424


Campaign 94F6 - Update Tail Lamp Seal



94F6 UPDATE - Tail Lamp Seal (NVLW)



94 12 75



2029196/2



April 24, 2012.



Supersedes Technical DIAGNOSIS AND REPAIR Group 94 number 12 - 73 dated April 16, 2012 for reasons listed below.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 163



Affected Vehicles



Condition



This Update has been proactively released to prevent the following condition from occurring in the vehicle:



The contacts of the inner LED tail lights may develop oxidation which may cause malfunctions of the inner LED tail light. The outer tail lights are



not affected and still function properly.



This Update is in effect until removed.



Vehicle must meet all of the following criteria:



^ Procedure is valid only for vehicles that show the 94F6 code in the ElsaWeb Campaign/Action Information screen on the day of repair.



^ Vehicle must be within the New Vehicle Limited Warranty.



^ Procedure must be performed within the allotted time frame stated in this Technical DIAGNOSIS AND REPAIR.



^ Procedure must be performed on applicable vehicles in dealer inventory prior to sale.



Technical Background



On Audi A4 vehicles with LED tail lights manufactured within a specific period, it is possible that oxidation can occur on the contacts of the inner



LED tail lights due to environmental factors. This can lead to malfunctions. The outer tail lights are not affected and still function properly.



Production Solution



The seals on the inner tail light assemblies must be replaced on the affected vehicles.



Service



1. Replace seals for inner tail light assemblies (left and right sides).



Tip: To remove the old seals, warm gently with a hot air blower. Use the lowest setting, as excessive heat causes the tail light assemblies to



deform.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 164



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 165



Warranty



Required Parts and Tools



^ Properly destroy and dispose of removed parts in accordance with all state and local requirements, unless otherwise indicated and/or requested



through SAGA.



^ If you have exhausted your allocated parts and you require additional parts for vehicles affected by this Update but have exceeded your Upper



Order Limit, please submit your requests for additional parts via email to upperorderlimits@audi.com. Be sure to include the affected VINs with



your order. Prior to submitting your request, ensure that each vehicle has the 94F6 code open in ElsaWeb. Your order will be reviewed and



processed accordingly.



Additional Information



All parts and service references provided in this Update are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.