Mercedes Benz Truck R 320 BLUETEC Technical T-88_70-62A Date: 081120
Body - Power Mirror Folding Feature Inoperative
Date: November 20, 2008
Order No.: T-B-88.70/62a
Supersedes: T-B-88.70/62 dated March 26, 2007
Group: 88
Revision History
SUBJECT:
Model 164.122/125/172/175/177/186/822/825/871/886
Model 251.122/125/156/165/175/177
Equipped with SA Code 500 (Electric Folding Outside Mirrors)
Electric Folding for the Exterior Mirrors Not Functioning
If you receive customer reports in the above model vehicles of the electric folding feature for the exterior mirrors not functioning, this may be due to
the electrical connector for the mirror folding feature not being seated correctly in the mirror housing. To resolve, perform the following.
1. Remove exterior mirror. Refer to WIS document AR88.70-P-9000GZ.
2. Detach lock washer (Figure 1, 1).
Mercedes Benz Truck R 320 BLUETEC
Page 151
3. Pull off plastic cap (Figure 1, 2).
4. Check connector (Figure 2) for proper seating. If necessary, reseat connector.
5. Reinstall plastic cap (Figure 1, 2).
6. Reinstall lock washer (Figure 1, 1).
7. Reinstall exterior mirror. Refer to WIS document AR88.70-P-9000GZ.
NOTE:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been
generated on November 20, 2008. Please refer to Netstar -> Star TekInfo -> Star Time for the most current labor time allowance.
In Case of Warranty
Operation: Outside mirror on left, R&R/replace (88-3221)
If necessary: Outside mirror on right, R&R/replace (88-3231)
If necessary: Outside mirrors (both), R&R/replace (88-3243)
Body - Power Mirror Folding Feature Inoperative
Date: November 20, 2008
Order No.: T-B-88.70/62a
Supersedes: T-B-88.70/62 dated March 26, 2007
Group: 88
Revision History
SUBJECT:
Model 164.122/125/172/175/177/186/822/825/871/886
Model 251.122/125/156/165/175/177
Equipped with SA Code 500 (Electric Folding Outside Mirrors)
Electric Folding for the Exterior Mirrors Not Functioning
If you receive customer reports in the above model vehicles of the electric folding feature for the exterior mirrors not functioning, this may be due to
the electrical connector for the mirror folding feature not being seated correctly in the mirror housing. To resolve, perform the following.
1. Remove exterior mirror. Refer to WIS document AR88.70-P-9000GZ.
2. Detach lock washer (Figure 1, 1).
Mercedes Benz Truck R 320 BLUETEC
Page 151
3. Pull off plastic cap (Figure 1, 2).
4. Check connector (Figure 2) for proper seating. If necessary, reseat connector.
5. Reinstall plastic cap (Figure 1, 2).
6. Reinstall lock washer (Figure 1, 1).
7. Reinstall exterior mirror. Refer to WIS document AR88.70-P-9000GZ.
NOTE:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been
generated on November 20, 2008. Please refer to Netstar -> Star TekInfo -> Star Time for the most current labor time allowance.
In Case of Warranty
Operation: Outside mirror on left, R&R/replace (88-3221)
If necessary: Outside mirror on right, R&R/replace (88-3231)
If necessary: Outside mirrors (both), R&R/replace (88-3243)
