P0836
Fault present in control module ETC (P0836)
Possible cause:
Transmission
Affected functions:
Engine diagnosis
Automatic transmission Function
Test 1: Check component N15/3 (ETC [EGS] control unit).
1. Check component N15/3 (ETC [EGS] control unit).
Read out fault memory of transmission control unit and process stored fault codes.
Possible cause and remedy
Read out fault memory of transmission control unit and process stored fault codes.
End of test
P1999
Fault present in control module ETC (P1999)
Possible cause:
This fault can be ignored and erased.
Affected functions:
Power generation
Test 1: This fault can be ignored and erased.2010 Mercedes Benz E 63 AMG Sedan (212.077) V86.3L (156.985)
Copyright ? 2013, ALLDATA
10.52SS
Page 938
1. This fault can be ignored and erased.
Note:This fault can be ignored and erased.
P2004
Diagnosis of tumble flap 'Intake manifold' : Short circuit to ground of sensor lines / Tumble flap shafts stick in the actuated
position. (P2004)
Possible cause:
A guided test is not available at present.
Affected functions:
Engine output
Note:A guided test is not available at present.
Fault present in control module ETC (P0836)
Possible cause:
Transmission
Affected functions:
Engine diagnosis
Automatic transmission Function
Test 1: Check component N15/3 (ETC [EGS] control unit).
1. Check component N15/3 (ETC [EGS] control unit).
Read out fault memory of transmission control unit and process stored fault codes.
Possible cause and remedy
Read out fault memory of transmission control unit and process stored fault codes.
End of test
P1999
Fault present in control module ETC (P1999)
Possible cause:
This fault can be ignored and erased.
Affected functions:
Power generation
Test 1: This fault can be ignored and erased.2010 Mercedes Benz E 63 AMG Sedan (212.077) V86.3L (156.985)
Copyright ? 2013, ALLDATA
10.52SS
Page 938
1. This fault can be ignored and erased.
Note:This fault can be ignored and erased.
P2004
Diagnosis of tumble flap 'Intake manifold' : Short circuit to ground of sensor lines / Tumble flap shafts stick in the actuated
position. (P2004)
Possible cause:
A guided test is not available at present.
Affected functions:
Engine output
Note:A guided test is not available at present.