2010 Mercedes Benz SLK 55 AMG (171.473) V8-5.5L (113.989) Copyright ? 2013, ALLDATA 10.52SS Page 1
A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts
2766
Excessive rpms have occurred at component Y3/8n2 (Internal speed sensor (VGS)).
Possible cause:
- Y3/8n2 (Internal speed sensor (VGS))
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action on overspeed of component Y3/8n2 (Internal speed sensor (VGS))
1. Remedial action on overspeed of component Y3/8n2 (Internal speed sensor (VGS))
Operation number of operation texts and work units or standard texts and flat rates:27-0641Possible cause and remedy
- Erase fault memory in control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
- Conduct a road test with the vehicle.During the road test, drive the engine from gear 1 to gear 3 in the engine speed cutoff range.
- Read out fault memory of control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit).
Question
- Is control unit EGS electronic transmission control indicating the current fault code 2766?
YES
Preconditions
- Control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit) is indicating the current fault code 2766.
Remedy
- Performance of SCN coding
END OF TEST
NO
Preconditions
- Control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit) is not indicating any fault codes.
Remedy
- Read out fault memory of control unit Engine management.
- Process displayed fault codes in control module Engine management.
END OF TEST
********************************************************************
